0 items in cart
1.5" Tri Clover Compatible Racking Arm
These racking arms do have a small seam on the inner pipe. We have grinded and buffed them as much as possible, but because of this we recommend only using it during the hot side as they might not be fully sanitary.
This all 304 stainless steel racking arm features an inner flange that can be used for rotating, but it does not have the extra double o-rings to help seal so we do recommend being careful when rotating. A PTFE Teflon gasket makes rotating very easy.
The sweeping bend allows you to get further into the vessel and pull more from the center. Do you sometimes forget which way the arm is facing? Worry no more! A directional pipe points in the same direction as where the end of the arm is facing.
Material: 304 Stainless Steel
Overall Length: 17.75"
Centerline Bend Radius: 6.5"
Outer Flange to Inner Flange: 3"
Flange Inside Diameter: 1.375"
Arm Outside Diameter: 1"
Arm Inside Diameter: 0.875"
© 2010 - 2020 Brewers Hardware, Inc.. All rights reserved.