- Anvil Brewing
- Brewery Controllers
- Brew Stands & Systems
- Brewing Kettles & Hop Filters
- Burners & Accessories
- Blichmann Engineering
- Cam & Groove Fittings
- Conicals & Accessories
- CIP Spray Balls
- Custom Welding
- Fermentor Kits
- Five Star Chemicals
-
Gaskets
- 1/2" & 3/4" Tri Clover Compatible Gaskets
- 1"/1.5" Tri Clover Compatible Gaskets
- 2" Tri Clover Compatible Gaskets
- 2.5" Tri Clover Compatible Gaskets
- 3" Tri Clover Compatible Gaskets
- 4" Tri Clover Compatible Gaskets
- 6" Tri Clover Compatible Gaskets
- 8" Tri Clover Compatible Gaskets
- 10" Tri Clover Compatible Gaskets
- 12" Tri Clover Compatible Gaskets
- Kegging Equipment/Accessories
- Modular Return System
- O-Rings
- Penguin Chillers
- Pumps
- Quick Disconnect Fittings
- RIMS Tubes & Electric Brewing
- Tapcooler Bottle Filler & Accessories
- Thermowells
- Stainless Tubing
- Threaded Fittings
- Temperature Probe Components
- Temperature Sensors
-
Tri Clamp Compatible Fittings
- Tri Clover Compatible X NPT Adapters
- Tri Clover Compatible X Hose Barb
- Tri Clover Compatible X Cam & Groove
- Tri Clover Compatible X Quick Disconnect
- Tri Clover Compatible X Beer Thread
- Tri Clover Compatible X Garden Hose Thread
- Tri Clover Compatible X Corny Post Thread
- Tri Clover Compatible X Compression Adapters
- Tri Clover Compatible X Flare Adapters
- Tri Clover Compatible X BSP Fittings
- Tri Clover Compatible Clamps
- Tri Clover Compatible Gaskets
- Tri Clover Compatible Valves
- Tri Clover Compatible Ferrules
- Tri Clover Compatible Caps
- Tri Clover Compatible Elbows
- Tri Clover Compatible Tees
- Tri Clover Compatible Wyes
- Tri Clover Compatible Crosses
- Tri Clover Compatible Sight Glasses
- Tri Clover Compatible Concentric Reducers
- Tri Clover Compatible Eccentric Reducers
- Tri Clover Compatible Cap-Style Reducers
- Tri Clover Compatible Extension Tubes/Spools
- Tri Clover Compatible Check Valves
- Tri Clover Compatible PRV Tank Breathers
- Tri Clover Compatible Pressure Gauges
-
Shop By Size
- 1/2"-3/4" Tri Clover Compatible Fittings
- 1"/1.5" Tri Clover Compatible Fittings
- 2" Tri Clover Compatible Fittings
- 2.5" Tri Clover Compatible Fittings
- 3" Tri Clover Compatible Fittings
- 4" Tri Clover Compatible Fittings
- 6" Tri Clover Compatible Fittings
- 8" Tri Clover Compatible Fittings
- 10" Tri Clover Compatible Fittings
- 12" Tri Clover Compatible Fittings
- Wort Strainers
- Tubing/Hose
- Weldless Fittings
- Merch
- Clearance
45 Gallon TC Fitted Boil Kettle with Tangential Inlet and Temperature Port
POT45BKTI
45 Gallon TC FItted Boil Kettle with Tangential Inlet and Temperature Port
- Fitted for Tri Clover Compatible Tri Clamp Fittings.
- 22.5" Diameter X 32" Tall with Heavy Duty 1.2mm Wall Thickness.
- 304 Stainless Steel, Polished Inside and Out.
- Tangential Inlet for Whirlpooling.
- Skirted design with rasied floor allows for bottom draining
Default shipping is for Continental United States (lower 48) only. If shipping outside this area, please email or give us a call for a shipping quote.
Our 45 Gallon series of Brewing Kettles share these common features:
- Fitted for Tri Clover Compatible Tri Clamp Fittings.
- Skirted design with a raised floor with a bottom drain near the edge of the kettle allows for complete draining with no pickup tube.
- Bottom draining outlet is positioned at the edge of the kettle rather than from the center to minimize any wort scorching in the tube.
- 1" Tri Clover Compatible outlet and Whirlpool Inlet.
- 1" Tri Clover Compatible Tri Clamp Temperature Port located Above the Outlet Ferrule
- 22.5" Diameter X 32" Tall with Heavy Duty 1.2mm Wall Thickness.
- Included Lid Features a Hook to Hang Lid from the Kettle Rim.
- 304 Stainless Steel, Polished Inside and Out.
- Intended for a 1BBL batch size.
The Boil Kettle Version also includes:
- 1" Tri Clover Compatible Butterfly Valves for the outlet and inlet.
- Cap to seal the temperature port.
- Required Clamps and Gaksets. (3 clamps and 3 gaskets)
Just like commercial scale equipment, our 45 gallon boil kettle has a tangential inlet for forming a clockwise whirlpool. This makes a drastic reduction in chilling time when used with an immersion chiller and also creates a nice hop/trub pile in the center of the kettle, minimizing trub entering your fermenters. The 45 gallon volume is perfect for a 1BBL batch size, this kettle is very popular for commercial craft brewers putting together a decent sized pilot system.
We can weld additional ferrules to these here in-house for electric element adapters, additional termperature ports, etc. See the "Related Products" below.