Version 2 is almost identical to our original brew stand but has smaller deck square tubing for a more compact design. The square tubing is 2" x 1" instead of 2" x 2". It still supports the same weight but looks slim and saves some weight.

Includes all the same accessories like pump mounts, and casters. The pictures shown do not show these accessories but they are included.

The Brew Stand - Single Tier Stainless Steel Brew Stand.

"The Brew Stand" is a single tier brew stand designed for most 15-20 gallon kettles 16" in diameter, including 'Keggles'.   

Starting from the top, the deck of the stand is constructed of 2" x 1" square 16 guage 304 stainless.  The deck is supported  by 2" diameter .065" wall round tubing legs to fully support kettles to 20 gallon. All of the lateral structural supports are 1.5" .065 wall round tubing.  The advantage of the round tubing is we can make most of the welds in our rotary welding lathe, providing a single continuous weld with only one start/stop; providing a single consistent and nearly invisible weld at those points.  All of the material cuts are made on a high-end Doringer cold saw, allowing for nearly perfect weld-ready cuts free of discoloration and contamination of an abrasive cut-off saw.  (Going off on a tangent: cold saws are really cool!  If you've never seen one, they're like a wood miter saw but only turn 54 RPM.  The material is clamped in a vice while the 14" fine-toothed blade is flooded with coolant while it cuts, essentially milling through the material without heating it.)  After welding, all of the welds are cleaned and repassivated with an electro-chemical weld cleaner.  

The Brew Stand includes the stand itself, 2 pump mounts (very cool, they clamp in place on the 1.5" tubing, allowing you to adjust their position to align to your kettles.) and Total Locking casters that lock on both roll and rotation.  

What you will need:

You'll need 2 pumps since this is a single tier system and of course your kettles and plumbing.

Dimensions:

The Brew Stand is 54" wide X 18" deep and approximately 27" tall.  The height varies because the caster height varies between shipments we get.

If you have any questions as to the suitability of The Brew Stand for your application, please call us before ordering. 

NEW LOWER PRICE!  The higher volume on these has allowed us to purchase much higher volumes of stainless steel and we're passing that savings down to you with a new lower price!

****  Special: Brew Stands will ship for free to the lower 48 states!!!  *****  For destinations outside the lower 48, please call us.

Currently built to order. 2-3 week lead time