Call us ~ Mon-Fri, 8:30-5 PST:  714-891-1150

Clearance

All of our products go through a strict quality control check before being put on the shelf. Some items didn't make the cut and are offered at a discount. Other items might be discontinued or refurbished. All items are sold 'as is' but are in full working condition.

Drop items here to shop
Product has been added to your cart
  • 2" Tri Clover Compatible X 1.5" Male NPT - Clearance
    • 15% off
    Drag and drop me to the cart The product is unavailable in the catalog

    2" Tri Clover Compatible X 1.5" Male NPT - Clearance

    The wrench area on these is a little smaller that our standard fitting so we are offering them at a discount. Because it is about half the size it may be difficult using a wrench.

    • $17.00

    Not rated yet
    $20.00  save 15%
  • 2" Tri Clover Compatible Pressure Release Valve/Vacuum Breaker - Clearance
    • 10% off
    Choose the product options first The product is unavailable in the catalog

    2" Tri Clover Compatible Pressure Release Valve/Vacuum Breaker.

    We check all our pressure release valves to make sure they release at their proper PSI, but these didn't make the cut. Check the dropdown menu for available PSI options.

    If a 15 or 30 PSI is listed, it is because it was labeled as being able to release at a different PSI.

    These valves do not release pressure at their intended PSI, so we recommend running a final test to verify the release PSI before using them with your setup.

    • $99.00

    Not rated yet
    $110.00  save 10%
  • Replacement Glass for TC10SG - Clearance
    • 20% off
    Drag and drop me to the cart The product is unavailable in the catalog

    Replacement Glass for TC10SG - Clearance

    This replacement glass has some slight blemeshes as shown in the photos. These are some examples of what the glass may look like. These defects are purely cosmetic and will not affect the integrity of the glass. We are super picky about quality control and these didn't make the cut and we are offering them at a discount! 

    • $6.40

    Not rated yet
    $8.00  save 20%
  • Replacement Glass for TC15SG - Clearance
    • 20% off
    Drag and drop me to the cart The product is unavailable in the catalog

    Replacement Glass for TC15SG - Clearance

    This replacement glass has some slight blemeshes as shown in the photos. These are some examples of what the glass may look like. These defects are purely cosmetic and will not affect the integrity of the glass. We are super picky about quality control and these didn't make the cut and we are offering them at a discount! 

    • $8.00

    Not rated yet
    $10.00  save 20%
  • Replacement Glass for TC20SG - Clearance
    • 20% off
    Drag and drop me to the cart The product is unavailable in the catalog

    Replacement Glass for TC20SG - Clearance. Glass Only

    This replacement glass has some slight blemeshes as shown in the photos. These are some examples of what the glass may look like. These defects are purely cosmetic and will not affect the integrity of the glass. We are super picky about quality control and these didn't make the cut and we are offering them at a discount! 

    • $8.00

    Not rated yet
    $10.00  save 20%
  • 20 Gallon TC Fitted HLT or Boil Kettle with Temperature Port - Clearance
    • 5% off
    Drag and drop me to the cart The product is unavailable in the catalog

    We welded on a few extra ports to this 20 gallon kettle and it's for sale at a discount! 

    It has the standard 1" TC temperature port and 1.5" TC Outlet but also includes these ports shown in the pictures.

    • 1.5" TC port a few inches to the right of the outlet
    • 2" TC port towards the back on the right side

     

    20 Gallon TC FItted Hot Liquor Tank/Kettle with Temperature Port

    • Fitted for Tri Clover Compatible Tri Clamp Fittings.
    • 15 3/4" Diameter X 25 1/4" Tall with Heavy Duty 1.2mm Wall Thickness.
    • 304 Stainless Steel, Polished Inside and Out.

     

    Default shipping is for Continental United States (lower 48) only. If shipping outside this area, please email or give us a call for a shipping quote.

    • $399.00

    Not rated yet
    $420.00  save 5%
  • Drag and drop me to the cart The product is unavailable in the catalog

    1" Tri Clover Compatible Ball Valve with a Butterfly Pull Trigger Handle.

     

    • $69.00

    Not rated yet
  • 9V Power Supply Adapter
    • 33% off
    Drag and drop me to the cart The product is unavailable in the catalog

    9V Power Supply Adapter

    9V DC 1A

    This is the power supply adapter that was included with our stir plates we used to sell a long long time ago. We found an old box so we are blowing these out. 

    NOTE: This is not enough power to support the BCS. The BCS requires a 12V power supply and this is only 9V. 

    • $5.00

    Not rated yet
    $7.50  save 33%
  • 1/2' NPT Locknut with O-ring Groove
    • 8% off
    Drag and drop me to the cart The product is unavailable in the catalog

    1/2' NPT Locknut with O-ring Groove - 304 Stainless Steel

    • $5.50

    Not rated yet
    $6.00  save 8%
  • Drag and drop me to the cart The product is unavailable in the catalog

    1" NPS Ring

    This is just a 1" NPS fitting and does not have a Tri Clover flange. We also sell versions with 1.5" and 2" Tri Clover compatible flanges. 

    • $12.00

    Not rated yet
  • Brewers Hardware T-Shirt - White - Clearance
    • 20% off
    Choose the product options first The product is unavailable in the catalog

    Brewers Hardware Men's T-Shirt - White

    100% Cotton

    They tend to run a little small, so you might want to order 1 size larger than you usually wear.

    • $9.60

    Not rated yet
    $12.00  save 20%
  • 1.5" Tri Clover Compatible X Female Beer Thread - Clearance
    • 10% off
    Drag and drop me to the cart The product is unavailable in the catalog

    1.5" Tri Clover Compatible X Female Beer Thread - Clearance

    These fittings are from our original run of beer threads. Our variances were a little high and it resulted in these not fitting correctly with some MicroMatic products. Because of this, we are offering these at a discount! These still work great with most other beer shanks, sanke couplers, etc. 

    • $17.10

    Not rated yet
    $19.00  save 10%
  • 1.5" Tri Clover Compatible Pressure Release Valve/Vacuum Breaker - Clearance
    • 10% off
    Choose the product options first The product is unavailable in the catalog

    1.5" Tri Clover Compatible Pressure Release Valve/Vacuum Breaker.

    We check all our pressure release valves to make sure they release at their proper PSI, but these didn't make the cut. Check the dropdown menu for available PSI options.

    If a 15 or 30 PSI is listed, it is because it was labeled as being able to release at a different PSI.

    These valves do not release pressure at their intended PSI, so we recommend running a final test to verify the release PSI before using them with your setup.

    • $99.00

    Not rated yet
    $110.00  save 10%
  • Tri Clover Compatible Concentric Reducer 1" X 1/2" Same Flange - Clearance
    • 20% off
    Drag and drop me to the cart The product is unavailable in the catalog

    Tri Clover Clamp Style Concentric Reducer 1" X 1/2" with matching flanges.

    This reducer has 1" tri clover compatible flanges (2" outside diameter flange) on both sides instead of our standard one which has a 1" tri clover compatible flange and a 1/2" tri clover compatible flange. One side has a 7/8" inside diameter and the other has a 3/8" inside diameter.

    If you are looking to reduce your bore inside diameter from 7/8" to 3/8" while still having a 1" tri clover flange, then this will work for you. Does it look a little funny? Sure, but it will get the job done.

    • $14.40

    Not rated yet
    $18.00  save 20%
  • Tri Clover Compatible Concentric Reducer 1" X 3/4" Same Flange - Clearance
    • 20% off
    Drag and drop me to the cart The product is unavailable in the catalog

    Tri Clover Clamp Style Concentric Reducer 1" X 3/4" with matching flanges.

    This reducer has 1" tri clover compatible flanges (2" outside diameter flange) on both sides instead of our standard one which has a 1" tri clover compatible flange and a 3/4" tri clover compatible flange. One side has a 7/8" inside diameter and the other has a 5/8" inside diameter.

    If you are looking to reduce your bore inside diameter from 7/8" to 5/8" while still having a 1" tri clover flange, then this will work for you. Does it look a little funny? Sure, but it will get the job done.

    • $14.40

    Not rated yet
    $18.00  save 20%
  • Tri Clover Compatible Strainer/Filter 3"OD Body Only - Refurbished
    • 13% off
    Drag and drop me to the cart The product is unavailable in the catalog

    Refurbished 3" outside diameter BODY ONLY for TC15STRAINER AND TC15STRAINER15.

    This is the outside body of our strainer/filter. There are some minor scratches, dings, blemishes, but they are only cosmetic and will not hinder the performance of the strainer. This does not come with anything else but the outside body of the strainer.  

    • $35.00

    Not rated yet
    $40.00  save 13%
    Only 3 left in stock.
  • Silicone Tubing 3/8" ID X 5/8" OD - Scrap
    • 15% off
    Choose the product options first The product is unavailable in the catalog

    Silicone Tubing 3/8" ID X 5/8" OD - Scrap

    Over the years, we have collected small scrap lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    • $2.34

    Not rated yet
    $2.75  save 15%
  • Silicone Tubing 1/2" ID X 3/4" OD - Scrap
    • 15% off
    Choose the product options first The product is unavailable in the catalog

    Silicone Tubing 1/2" ID X 3/4" OD - Scrap

    Over the years, we have collected small scrap lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    • $2.13

    Not rated yet
    $2.50  save 15%
  • Silicone Tubing 3/4" ID X 1" OD - Scrap
    • 15% off
    Product is out of stock The product is unavailable in the catalog

    Silicone Tubing 3/4" ID X 1" OD - Scrap

    Over the years, we have collected small scrap lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    • $2.76

    Not rated yet
    $3.25  save 15%
  • Silicone Tubing 3/4" ID X 1.125" OD - Scrap
    • 15% off
    Choose the product options first The product is unavailable in the catalog

    Silicone Tubing 3/4" ID X 1.125" OD - Scrap

    Over the years, we have collected small scrap lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    • $4.68

    Not rated yet
    $5.50  save 15%
Items 120 of 24
View 
Bestsellers
  • Drag and drop me to the cart The product is unavailable in the catalog
    • $17.10

    Not rated yet
    Add a different product to compare
    $19.00  save 10%
    • 10% off
  • Choose the product options first The product is unavailable in the catalog
    • $2.13

    Not rated yet
    Add a different product to compare
    $2.50  save 15%
    • 15% off
  • Drag and drop me to the cart The product is unavailable in the catalog
    • $5.50

    Not rated yet
    Add a different product to compare
    $6.00  save 8%
    • 8% off
  • Choose the product options first The product is unavailable in the catalog
    • $99.00

    Not rated yet
    Add a different product to compare
    $110.00  save 10%
    • 10% off