-
Tri Clamp Compatible Fittings
- 34mm Tri Clamp
- 34mm Tri Clamp X Tri Clamp Compatible Adapters
- Tri Clamp Compatible X NPT Adapters
- Tri Clamp Compatible X Hose Barb Adapters
- Tri Clamp Compatible X Cam & Groove Adapters
- Tri Clamp Compatible X Quick Disconnect Adapters
- Tri Clamp Compatible X Beer Thread Adapters
- Tri Clamp Compatible X Garden Hose Thread adapters
- Tri Clamp Compatible X Corny Post Thread Adapter
- Tri Clamp Compatible X Compression Adapters
- Tri Clamp Compatible X Flare Adapters
- Tri Clamp Compatible X BSP Adapters
- Tri Clamp Compatible Clamps
- Tri Clamp Compatible Gaskets
- Tri Clamp Compatible Valves
- Tri Clamp Compatible Ferrules
- Tri Clamp Compatible Caps
- Tri Clamp Compatible Elbows
- Tri Clamp Compatible Tees
- Tri Clamp Compatible Wyes
- Tri Clamp Compatible Crosses
- Tri Clamp Compatible Sight Glasses
- Tri Camp Compatible Concentric Reducers
- Tri Clamp Compatible Eccentric Reducers
- Tri Clamp Compatible Cap-Style Reducers
- Tri Clamp Compatible Spools
- Tri Clamp Compatible Check Valves
- Tri Clamp Compatible PRV Tank Breathers
- Tri Clamp Compatible Pressure Gauges
-
Shop By Size
- 1/2"-3/4" Tri Clamp Compatible Fittings
- 1"/1.5" Tri Clamp Compatible Fittings
- 2" Tri Clamp Compatible Fittings
- 2.5" Tri Clamp Compatible Fittings
- 3" Tri Clamp Compatible Fittings
- 4" Tri Clover Compatible Fittings
- 6" Tri Clover Compatible Fittings
- 8" Tri Clover Compatible Fittings
- 10" Tri Clover Compatible Fittings
- 12" Tri Clover Compatible Fittings
- Brewery Controllers
- Brew Stands & Systems
- Brewing Kettles & Hop Filters
- Burners & Accessories
- Cam & Groove Fittings
- Carbonation Stones
- Conicals & Accessories
- CIP Spray Balls
- Custom Welding
- Fermentor Kits
-
Gaskets
- 1/2" & 3/4" Tri Clamp Compatible Gaskets
- 1"/1.5" Tri Clamp Compatible Gaskets
- 2" Tri Clamp Compatible Gaskets
- 2.5" Tri Clamp Compatible Gaskets
- 3" Tri Clamp Compatible Gaskets
- 4" Tri Clamp Compatible Gaskets
- 6" Tri Clamp Compatible Gaskets
- 8" Tri Clamp Compatible Gaskets
- 10" Tri Clamp Compatible Gaskets
- 12" Tri Clamp Compatible Gaskets
- Kegging Equipment/Accessories
- Modular Return System
- O-Rings
- Pumps
- Quick Disconnect Fittings
- RIMS Tubes & Electric Brewing
- Thermowells
- Stainless Tubing
- Threaded Fittings
- Temperature Probe Components
- Temperature Sensors
- Wort Strainers
- Tubing/Hose
- Weldless Fittings
- Merch
- Clearance
- Anvil Brewing
- Blichmann Engineering
- Five Star Chemicals
- Penguin Chillers
- Tapcooler Bottle Filler & Accessories
Clearance
All of our products go through a strict quality control check before being put on the shelf. Some items didn't make the cut and are offered at a discount. Other items might be discontinued or refurbished. All items are sold 'as is' but are in full working condition.
Sort by:
Recommended
-
12" Tri Clover Compatible Fermentor Lid
12" Tri Clover Compatible Fermentor Lid w/ one 3" and three 1.5" TC ports
Only 1 left in stock. -
1.5" Tri Clamp Compatible Tri Clamp X 1.5" Hose Barb, 4" OAL - Clearance
Out of stock1.5" Tri Clamp Compatible Tri Clamp X 1.5" Hose Barb, 4" OAL - Clearance
These barbs have been dinged up but still work great! Please take a look at the pictures of the quality. Because they are scratch and dent there are no returns or refunds.
-
1" Tri Clover Compatible Check Valve - Clearance
Out of stock1" Tri Clover Compatible Check Valve
Inside diameter is 5/8" (0.625") instead of the standard 0.875". Will not impact performance but it is smaller than it should be so it is on clearance!
-
Chugger CP-27 Drive Magnet
Chugger Pump Drive Magnet - Standard for Classic Models: CPSS-IN-1, CPSS-IN-2, CPSS-CI-1, CPSS-CI-2, CPPS-IN-1 and CPPS-IN-2.
-
1.5" Tri Clamp Compatible Thermowell with 1/2" FPT Inlet 2.5" Length - Clearance
Out of stockThese are custom made thermowells that never found a home so they can be yours at a discount!
Length is custom at 2.5". 2.5" is the penetration past the face of the Tri Clamp Compatible Flange. Inlet is 1/2" Female NPT.
-
2" Tri Clamp Compatible Buna Gaskets - Made in USA - Bulk Quantity 250 Gaskets
We have these bagged up and ready to go so we are offering them at a discount! This is for a bulk quantity of 250 gaskets.
Quantity 250 2" Tri Clamp Compatible Buna Gaskets
Only 1 left in stock. -
1.5" Tri Clamp Compatible Pressure Release Valve/Vacuum Breaker - Clearance
1.5" Tri Clamp Compatible Pressure Release Valve/Vacuum Breaker.
We check all our pressure release valves to make sure they release at their proper PSI, but these didn't make the cut. Check the dropdown menu for available PSI options.
If a 15 or 30 PSI is listed, it is because it was labeled as being able to release at a different PSI.
These valves do not release pressure at their intended PSI, so we recommend running a final test to verify the release PSI before using them with your setup.
-
2" Tri Clover Compatible Pressure Release Valve/Vacuum Breaker - Clearance
2" Tri Clover Compatible Pressure Release Valve/Vacuum Breaker.
We check all our pressure release valves to make sure they release at their proper PSI, but these didn't make the cut. Check the dropdown menu for available PSI options.
If a 15 or 30 PSI is listed, it is because it was labeled as being able to release at a different PSI.
These valves do not release pressure at their intended PSI, so we recommend running a final test to verify the release PSI before using them with your setup.
-
9V Power Supply Adapter
9V Power Supply Adapter
9V DC 1A
This is the power supply adapter that was included with our stir plates we used to sell a long long time ago. We found an old box so we are blowing these out.
NOTE: This is not enough power to support the BCS. The BCS requires a 12V power supply and this is only 9V.
Only 4 left in stock. -
Brewers Hardware T-Shirt - Black - Clearance
Brewers Hardware Men's T-Shirt - Black
100% Cotton
They tend to run a little small, so you might want to order 1 size larger than you usually wear.
-
Brewers Hardware T-Shirt - White - Clearance
Brewers Hardware Men's T-Shirt - White
100% Cotton
They tend to run a little small, so you might want to order 1 size larger than you usually wear.
-
1"/1.5" Tri Clover Compatible X 5/8" Hose Barb Manifold
1.5" Tri Clover Compatible Manifold with four 5/8" Hose Barbs
-
1.5" Tri Clover Compatible X Female Beer Thread - Clearance
1.5" Tri Clover Compatible X Female Beer Thread - Clearance
These fittings are from our original run of beer threads. Our variances were a little high and it resulted in these not fitting correctly with some MicroMatic products. Because of this, we are offering these at a discount! These still work great with most other beer shanks, sanke couplers, etc.
-
Silicone Tubing 1/4" ID X 1/2" OD - Remnants
Silicone Tubing 1/4" ID X 1/2" OD - Remnants
Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
-
Silicone Tubing 3/8" ID X 5/8" OD - Remnants
Silicone Tubing 3/8" ID X 5/8" OD - Remnants
Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
-
Silicone Tubing 1/2" ID X 3/4" OD - Remnants
Silicone Tubing 1/2" ID X 3/4" OD - Remnants
Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
-
Silicone Tubing 3/4" ID X 1" OD - Remnants
Silicone Tubing 3/4" ID X 1" OD - Remnants
Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
-
Silicone Tubing 3/4" ID X 1.125" OD - Remnants
Silicone Tubing 3/4" ID X 1.125" OD - Remnants
Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
-
Reinforced Silicone Tubing 1/4" ID X .52" OD - Remnants
Reinforced Silicone Tubing 1/4" ID X .52" OD - Remnants
Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
-
Reinforced Silicone Tubing 3/8" ID X .655" OD - Remnants
Reinforced Silicone Tubing 3/8" ID X .655" OD - Remnants
Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
