Call us:  714-891-1150

Clearance

All of our products go through a strict quality control check before being put on the shelf. Some items didn't make the cut and are offered at a discount. Other items might be discontinued or refurbished. All items are sold 'as is' but are in full working condition.

Products: 120 of 24
  • 1.5" Tri Clamp Compatible Tri Clamp X 1.5" Hose Barb, 4" OAL - Clearance
    • 20% off

    1.5" Tri Clamp Compatible Tri Clamp X 1.5" Hose Barb, 4" OAL - Clearance

    1.5" Tri Clamp Compatible Tri Clamp X 1.5" Hose Barb, 4" OAL - Clearance

    These barbs have been dinged up but still work great! Please take a look at the pictures of the quality. Because they are scratch and dent there are no returns or refunds.

    Not rated yet
    • $16.80
  • Replacement Nut for Tri Clover Compatible Clamps
    • 25% off

    Replacement Nut for Tri Clover Compatible Clamps

    Replacement Nut for 1/2" through 4" Tri Clover Compatible Clamps

    Not rated yet
    • $0.75
  • 1" Tri Clover Compatible Check Valve - Clearance
    • 10% off

    1" Tri Clover Compatible Check Valve - Clearance

    1" Tri Clover Compatible Check Valve

    Inside diameter is 5/8" (0.625") instead of the standard 0.875". Will not impact performance but it is smaller than it should be so it is on clearance!

    Not rated yet
    • $63.00
    Out of stock
  • Chugger CP-27 Drive Magnet

    Chugger Pump Drive Magnet - Standard for Classic Models: CPSS-IN-1, CPSS-IN-2, CPSS-CI-1, CPSS-CI-2, CPPS-IN-1 and CPPS-IN-2.

    Not rated yet
    • $10.00
  • 1.5" Tri Clamp Compatible Thermowell with 1/2" FPT Inlet 2.5" Length - Clearance
    • 25% off

    1.5" Tri Clamp Compatible Thermowell with 1/2" FPT Inlet 2.5" Length - Clearance

    These are custom made thermowells that never found a home so they can be yours at a discount!

    Length is custom at 2.5". 2.5" is the penetration past the face of the Tri Clamp Compatible Flange. Inlet is 1/2" Female NPT. 

    Not rated yet
    • $47.25
    Out of stock
  • 2" Tri Clamp Compatible Buna Gaskets - Made in USA - Bulk Quantity 250 Gaskets
    • 20% off

    2" Tri Clamp Compatible Buna Gaskets - Made in USA - Bulk Quantity 250 Gaskets

    We have these bagged up and ready to go so we are offering them at a discount! This is for a bulk quantity of 250 gaskets. 

    Quantity 250 2" Tri Clamp Compatible Buna Gaskets

    Not rated yet
    • $90.00
    Only 2 left in stock.
  • 2" Tri Clover Compatible X 1.5" Male NPT - Clearance
    • 15% off

    2" Tri Clover Compatible X 1.5" Male NPT - Clearance

    2" Tri Clover Compatible X 1.5" Male NPT - Clearance

    The wrench area on these is a little smaller that our standard fitting so we are offering them at a discount. Because it is about half the size it may be difficult using a wrench.

    Not rated yet
    • $17.00
  • 1.5" Tri Clamp Compatible Pressure Release Valve/Vacuum Breaker - Clearance
    • 10% off

    1.5" Tri Clamp Compatible Pressure Release Valve/Vacuum Breaker - Clearance

    1.5" Tri Clamp Compatible Pressure Release Valve/Vacuum Breaker.

    We check all our pressure release valves to make sure they release at their proper PSI, but these didn't make the cut. Check the dropdown menu for available PSI options.

    If a 15 or 30 PSI is listed, it is because it was labeled as being able to release at a different PSI.

    These valves do not release pressure at their intended PSI, so we recommend running a final test to verify the release PSI before using them with your setup.

    Not rated yet
    • $99.00
  • 2" Tri Clover Compatible Pressure Release Valve/Vacuum Breaker - Clearance
    • 10% off

    2" Tri Clover Compatible Pressure Release Valve/Vacuum Breaker - Clearance

    2" Tri Clover Compatible Pressure Release Valve/Vacuum Breaker.

    We check all our pressure release valves to make sure they release at their proper PSI, but these didn't make the cut. Check the dropdown menu for available PSI options.

    If a 15 or 30 PSI is listed, it is because it was labeled as being able to release at a different PSI.

    These valves do not release pressure at their intended PSI, so we recommend running a final test to verify the release PSI before using them with your setup.

    Not rated yet
    • $99.00
  • 9V Power Supply Adapter
    • 33% off

    9V Power Supply Adapter

    9V Power Supply Adapter

    9V DC 1A

    This is the power supply adapter that was included with our stir plates we used to sell a long long time ago. We found an old box so we are blowing these out. 

    NOTE: This is not enough power to support the BCS. The BCS requires a 12V power supply and this is only 9V. 

    Not rated yet
    • $5.00
    Only 5 left in stock.
  • Brewers Hardware T-Shirt - Black - Clearance
    • 17% off

    Brewers Hardware T-Shirt - Black - Clearance

    Brewers Hardware Men's T-Shirt - Black

    100% Cotton

    They tend to run a little small, so you might want to order 1 size larger than you usually wear.

    Not rated yet
    • $10.00
  • Brewers Hardware T-Shirt - White - Clearance
    • 20% off

    Brewers Hardware T-Shirt - White - Clearance

    Brewers Hardware Men's T-Shirt - White

    100% Cotton

    They tend to run a little small, so you might want to order 1 size larger than you usually wear.

    Not rated yet
    • $9.60
  • 1"/1.5" Tri Clover Compatible X 5/8" Hose Barb Manifold

    1.5" Tri Clover Compatible Manifold with four 5/8" Hose Barbs

    Not rated yet
    • $35.00
  • 1.5" Tri Clover Compatible X Female Beer Thread - Clearance
    • 10% off

    1.5" Tri Clover Compatible X Female Beer Thread - Clearance

    1.5" Tri Clover Compatible X Female Beer Thread - Clearance

    These fittings are from our original run of beer threads. Our variances were a little high and it resulted in these not fitting correctly with some MicroMatic products. Because of this, we are offering these at a discount! These still work great with most other beer shanks, sanke couplers, etc. 

    Not rated yet
    • $17.10
  • Silicone Tubing 1/4" ID X 1/2" OD - Remnants
    • 20% off

    Silicone Tubing 1/4" ID X 1/2" OD - Remnants

    Silicone Tubing 1/4" ID X 1/2" OD - Remnants

    Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    Not rated yet
    • $2.40
    • $12.00
  • Silicone Tubing 3/8" ID X 5/8" OD - Remnants
    • 20% off

    Silicone Tubing 3/8" ID X 5/8" OD - Remnants

    Silicone Tubing 3/8" ID X 5/8" OD - Remnants

    Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    Not rated yet
    • $2.60
    • $13.00
  • Silicone Tubing 1/2" ID X 3/4" OD - Remnants
    • 20% off

    Silicone Tubing 1/2" ID X 3/4" OD - Remnants

    Silicone Tubing 1/2" ID X 3/4" OD - Remnants

    Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    Not rated yet
    • $2.36
    • $11.80
  • Silicone Tubing 3/4" ID X 1" OD - Remnants
    • 20% off

    Silicone Tubing 3/4" ID X 1" OD - Remnants

    Silicone Tubing 3/4" ID X 1" OD - Remnants

    Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    Not rated yet
    • $3.20
    • $16.00
  • Silicone Tubing 3/4" ID X 1.125" OD - Remnants
    • 20% off

    Silicone Tubing 3/4" ID X 1.125" OD - Remnants

    Silicone Tubing 3/4" ID X 1.125" OD - Remnants

    Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    Not rated yet
    • $5.60
    • $28.00
  • Reinforced Silicone Tubing 1/4" ID X .52" OD - Remnants
    • 20% off

    Reinforced Silicone Tubing 1/4" ID X .52" OD - Remnants

    Reinforced Silicone Tubing 1/4" ID X .52" OD - Remnants

    Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.

    PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.

    This product is not returnable.

    Not rated yet
    • $7.00
    • $35.00
Products: 120 of 24

Bestsellers