It's finally here. After months of R&D, we feel we have the best no oxygen dry hopper on the market. Introducing The Dry Hopper from Brewers Hardware.

• Dry hop without introducing oxygen into your fermentor? √
• Dry hop while fermenting under pressure? √

This dry hopper allows you to dry hop or add any additions to your beer without introducing oxygen and oxidizing the beer. It also allows you to make additions to your beer fermenting under pressure without having to release the pressure. This helps stabilize your fermentation schedule resulting in better repeatability with batches, healthier fermentation, and less oxidation. 

This dry hopper works by containing the addition inside of a sight glass and purging out the oxygen before dosing. By equalizing the pressure inside the sight glass and fermenter, you can add anything to your beer without degassing or depressurizing.

Specifications:

Weight: 14 lbs

Height: 11.25" (Around 12" with a gas QD connected)

Pellet Hops Capacity: 13-14 ounces

Pressure Rating: 15 PSI

With the included prv and corny gas post, you will be able to completely purge the chamber before dry hopping. The 3" TC butterfly valve ensures no hops will get stuck on their way down. 

We know a lot of people have a 4" TC port with fermentors from companies like Spike so we added a 4" x 3" TC Cap Reducer with an extra 3" clamp and gasket as an optional extra to make the dry hopper compatible. The dry hopper is pretty tall at 11.25" so you may have trouble using it if your fermentor is inside of a refrigerator or tight place.

For instructions on how to set up and use the dry hopper for both non-pressurized and pressurized fermentation, check out our PDF instructions in the link above. 

WARNING: Please be careful when using the dry hopper especially if fermenting under pressure. Removing the TC clamp holding onto the sight glass without pulling the PRV first can cause the sight glass to jump up as the pressure is vented out the bottom and cause damage to the tank or injury.