0 items in cart
Reinforced Silicone Tubing 1/2" ID X .80" OD - Scrap
Over the years, we have collected small scrap lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
The construction of SILBRADE enables silicone tubing to handle increased pressure applications. SILBRADE offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients. The flexible design and construction of SILBRADE allows excellent bend radii and permits installation in restricted spaces without impeding flow. SILBRADE, a peroxide-cured product, contains no sulphur or other acid-producing chemicals thereby eliminating the possibility of staining, corroding, or deteriorating other materials it contacts. It is also resistant to ozone and U.V. over long time periods. Care is recommended in the selection of fittings and clamps, as sharp barbed fittings or unlined metal clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures. SILBRADE may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.
This product is not returnable
© 2010 - 2021 Brewers Hardware, Inc.. All rights reserved.