Call us ~ Mon-Fri, 8:30-5 PST:  714-891-1150
1.5" Tri Clover Compatible RIMS Tube

Ratings and Reviews of 1.5" Tri Clover Compatible RIMS Tube

Back to product details

Score: 5.00 (votes: 11)
 
Score: 5.00 (votes: 11)
Rating of votes (11)
5
 
11customers
4
 
 
0customers
3
 
 
0customers
2
 
 
0customers
1
 
 
0customers
 
Customer reviews
Please sign in to add review
Items 110 of 11
View 
  • Chris Hinninger
    Dec 31, 1969, 16:00
    I did a lot of research on RIMS tubes before buying this product, including some of the DIY ones made with stainless tees. This one is great because the placement of the inlet and outlet optimize contact with the heating element. I am using a 4,500W 240V ULWD element, running at 120V, along with a cheap Ebay temperature controller. I am getting a little better than 1deg/s temperature increase with my 5gal MLT (I hope to upgrade to 10gallon batches soon). My only advice is to make sure you purchase a non-grounded thermocouple, if you go with the 1/4" FPT. Unless you specify it, most thermocouples will be grounded to the threaded fitting. This causes a ground loop to the heating element, which will make your temperature measurement useless. Overall, I am very satisfied with this product! Happy Brewing!
  • Neil Silvester
    Dec 31, 1969, 16:00
    I bought this unit when it was first released with the intention of incorporating it with the BCS I bought 18 months ago. Well it has taken me a looooong time to pull my finger out but I finally set everything up yesterday and am in the process of making my first brew. Needless to say I am more than happy with it. I am running a 240v 2200 watt cartridge element and so far am seeing about 1.2 deg c temp raises with my 40L square (esky) mash tun. Great product and even better after sales support! I highly reccommend not only this product but also this business to anyone and everyone. I'm the newly elected Brewmaster for the Brisbane, Australia brewing club and am looking forward to showing it off at a brewday I am hosting in a couple of weeks. Cheers mate =)
  • Joe
    Dec 31, 1969, 16:00
    Was a bit hesitant at first as it seemed like this was going to add up to a sizable equipment investment. My buddy and I both bought one and it works great.

    Does a great job of maintaining temperature and so easy to clean compared to the DIY versions using threaded pipe. Love it.

    I see there is a 2" version now. I might have gone for that if it was available to give a little more space for the element but my element doesn't seem to touch the sides so it really hasn't been an issue.
  • Charles Middleton
    Dec 31, 1969, 16:00
    First and foremost, the build quality is phenomenal. The tri clover design is a little hard to grasp if you aren't terribly mechanical like me, but once you have the system in front of you things make so much sense. It allows the entire system to be broken down and completely cleaned. It's a pleasure to assemble, break down as well as clean.

    DIY is very worth it for a lit of things, but this is one investment best left to the pros that can make an awesome product like this!
  • Warren Cook
    Dec 31, 1969, 16:00
    This is just an AWESOME piece of kit. After trawling the internet for RIMS builds and contemplating a DIY version I finally decided to purchase the BH RIMS tube as good DIY components are hard to source in the UK. The build quality is exquisite, it gleems like a piece of medical equipment. With my 3,500W 240V element it works a treat. Recently added a tri-clover sight-glass and it is worthwhile extra to track the wort clearing. Simple to assemble and break down for cleaning, 10 brews in and I cannot fault the RIMS tube at all. After sales support from Derrin and the team matched the product's high standard.
  • Daniel Shaw
    Dec 31, 1969, 16:00
    I've had the RIMS tube on my wish list for well over a year. I'm kicking myself for waiting so long to make the purchase. As other have mentioned, the quality is excellent. It certainly gives a professional appearance to my brewery!
  • Brandon Jackson
    Dec 31, 1969, 16:00
    I purchased this RIMS tube kit based on the high quality feedback it is getting, and I must say this thing is built to high standards and you won't regret this awesome piece of hardware!
  • Alan Ingersoll
    Dec 31, 1969, 16:00
    Why isn't "1"/1.5" Tri Clover Compatible X 1/2" Cam & Groove Male Plug" not a choice in the I/O configuration for this RIMS tube?
    Brewers Hardware, Inc.
    Jan 24, 2018, 23:18
    We will have a C&G version soon
  • Russell Sciandra Jr.
    Dec 31, 1969, 16:00
    The quality of this RIMS tube is second to none, and the ability to orient the input and output in different directions was just what I needed for my setup. It's solid, leak free, and the high polished finish really makes my whole system look professional. This equipment is worth every penny, and the customer service was outstanding. I highly recommend this RIMS tube to anyone looking to up the ante on their all grain brews.
  • Jesus Gomez
    Dec 31, 1969, 16:00
    We are buy products from your company, I'm new using your web site
Items 110 of 11
View