- Anvil Brewing
- Brewery Controllers
- Brew Stands & Systems
- Brewing Kettles & Hop Filters
- Burners & Accessories
- Blichmann Engineering
- Cam & Groove Fittings
- Conicals & Accessories
- CIP Spray Balls
- Custom Welding
- Fermentor Kits
- Five Star Chemicals
-
Gaskets
- 1/2" & 3/4" Tri Clover Compatible Gaskets
- 1"/1.5" Tri Clover Compatible Gaskets
- 2" Tri Clover Compatible Gaskets
- 2.5" Tri Clover Compatible Gaskets
- 3" Tri Clover Compatible Gaskets
- 4" Tri Clover Compatible Gaskets
- 6" Tri Clover Compatible Gaskets
- 8" Tri Clover Compatible Gaskets
- 10" Tri Clover Compatible Gaskets
- 12" Tri Clover Compatible Gaskets
- Kegging Equipment/Accessories
- Modular Return System
- O-Rings
- Penguin Chillers
- Pumps
- Quick Disconnect Fittings
- RIMS Tubes & Electric Brewing
- Tapcooler Bottle Filler & Accessories
- Thermowells
- Stainless Tubing
- Threaded Fittings
- Temperature Probe Components
- Temperature Sensors
-
Tri Clamp Compatible Fittings
- Tri Clover Compatible X NPT Adapters
- Tri Clover Compatible X Hose Barb
- Tri Clover Compatible X Cam & Groove
- Tri Clover Compatible X Quick Disconnect
- Tri Clover Compatible X Beer Thread
- Tri Clover Compatible X Garden Hose Thread
- Tri Clover Compatible X Corny Post Thread
- Tri Clover Compatible X Compression Adapters
- Tri Clover Compatible X Flare Adapters
- Tri Clover Compatible X BSP Fittings
- Tri Clover Compatible Clamps
- Tri Clover Compatible Gaskets
- Tri Clover Compatible Valves
- Tri Clover Compatible Ferrules
- Tri Clover Compatible Caps
- Tri Clover Compatible Elbows
- Tri Clover Compatible Tees
- Tri Clover Compatible Wyes
- Tri Clover Compatible Crosses
- Tri Clover Compatible Sight Glasses
- Tri Clover Compatible Concentric Reducers
- Tri Clover Compatible Eccentric Reducers
- Tri Clover Compatible Cap-Style Reducers
- Tri Clover Compatible Extension Tubes/Spools
- Tri Clover Compatible Check Valves
- Tri Clover Compatible PRV Tank Breathers
- Tri Clover Compatible Pressure Gauges
-
Shop By Size
- 1/2"-3/4" Tri Clover Compatible Fittings
- 1"/1.5" Tri Clover Compatible Fittings
- 2" Tri Clover Compatible Fittings
- 2.5" Tri Clover Compatible Fittings
- 3" Tri Clover Compatible Fittings
- 4" Tri Clover Compatible Fittings
- 6" Tri Clover Compatible Fittings
- 8" Tri Clover Compatible Fittings
- 10" Tri Clover Compatible Fittings
- 12" Tri Clover Compatible Fittings
- Wort Strainers
- Tubing/Hose
- Weldless Fittings
- Merch
- Clearance
Silicone Tubing 1/2" ID X 3/4" OD - Remnants
TUBES12X34-Scrap
Silicone Tubing 1/2" ID X 3/4" OD - Remnants
Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. Some pieces may be less translucent than others. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
Silicone tubing is translucent, FDA & NSF-1 approved as food safe and the ideal tubing for making brewery hoses. Silicone tubing has a low bursting pressure and must not be placed in an application where it could be pressurized. Our silicone tubing is ultra translucent for the best possible visibility of any silicone tubing on the market.
- -100ºF to 500ºF temperature range
- 1/2" ID X 3/4" OD
- 10PSI working pressure 30PSI burst pressure at 70ºF
- Translucent so you can see wort color and flow
- Remains flexible across a wide variety of temperatures
- Kink Resistant
- Made here in the USA.
To insure the highest standards of sanitation and quality, tubing products are NOT returnable.