Call us:  714-891-1150

Tri Clamp Compatible X NPT Inside and Outside

These unique Tri Clamp or Tri Clover compatible fittings from Brewers Hardware have NPT threads on both the inside and outside of the flange.  They are useful for adding carbonation/oxygenation stones, cleaning balls etc to the inside of a vessel or passing through a ferrule.  Mounts to a 1.5" Tri Clamp or Tri Clover compatible ferrule only, will not work with a 1" ferrule.  Available in four combinations.  CNC machined from a single piece of 304 stainless, these are not welded up fittings and do not have a seam.

Products: 14 of 4
  • 1.5" Tri Clover Compatible X 1/2" MPT inlet and 1/2" FPT on inside of ferrule

    These unique Tri Clover compatible fittings from Brewers Hardware have 1/2" MPT threads on the inlet and 1/2" FPT threads on the inside of the flange.  They are useful for adding carbonation/oxygenation stones, cleaning balls etc to the inside of a vessel or passing through a ferrule.  Mounts to a 1.5" ferrule only, will not work with a 1" ferrule. CNC machined from a single piece of 304 stainless, these are not welded up fittings and do not have a seam.

    Not rated yet
    • $25.00
    Backordered until end of January
  • 1.5" Tri Clover Compatible X 1/2" MPT inlet and 1/2" MPT on inside of ferrule

    These unique Tri Clover compatible fittings from Brewers Hardware have 1/2" MPT threads on the inlet and on the inside of the flange.  They are useful for adding carbonation/oxygenation stones, cleaning balls etc to the inside of a vessel or passing through a ferrule.  Mounts to a 1.5" ferrule only, will not work with a 1" ferrule. CNC machined from a single piece of 304 stainless, these are not welded up fittings and do not have a seam.

    Not rated yet
    • $25.00
  • 1.5" Tri Clover Compatible X 1/2" FPT inlet and 1/2" MPT on inside of ferrule

    These unique Tri Clover compatible fittings from Brewers Hardware have 1/2" FPT threads on the inlet and 1/2" MPT threads on the inside of the flange.  They are useful for adding carbonation/oxygenation stones, cleaning balls etc to the inside of a vessel or passing through a ferrule.  Mounts to a 1.5" ferrule only, will not work with a 1" ferrule. CNC machined from a single piece of 304 stainless, these are not welded up fittings and do not have a seam.

    Not rated yet
    • $25.00
  • 1.5" Tri Clover Compatible X 1/2" FPT inlet and 1/2" FPT on inside of ferrule

    These unique Tri Clover compatible fittings from Brewers Hardware have 1/2" FPT threads on the inlet and on the inside of the flange.  They are useful for adding carbonation/oxygenation stones, cleaning balls etc to the inside of a vessel or passing through a ferrule.  Mounts to a 1.5" ferrule only, will not work with a 1" ferrule. CNC machined from a single piece of 304 stainless, these are not welded up fittings and do not have a seam.

    Not rated yet
    • $25.00
    Backordered until end of December

Bestsellers