- Anvil Brewing
- Brewery Controllers
- Brew Stands & Systems
- Brewing Kettles & Hop Filters
- Burners & Accessories
- Blichmann Engineering
- Cam & Groove Fittings
- Conicals & Accessories
- CIP Spray Balls
- Custom Welding
- Fermentor Kits
- Five Star Chemicals
-
Gaskets
- 1/2" & 3/4" Tri Clover Compatible Gaskets
- 1"/1.5" Tri Clover Compatible Gaskets
- 2" Tri Clover Compatible Gaskets
- 2.5" Tri Clover Compatible Gaskets
- 3" Tri Clover Compatible Gaskets
- 4" Tri Clover Compatible Gaskets
- 6" Tri Clover Compatible Gaskets
- 8" Tri Clover Compatible Gaskets
- 10" Tri Clover Compatible Gaskets
- 12" Tri Clover Compatible Gaskets
- Kegging Equipment/Accessories
- Modular Return System
- O-Rings
- Penguin Chillers
- Pumps
- Quick Disconnect Fittings
- RIMS Tubes & Electric Brewing
- Tapcooler Bottle Filler & Accessories
- Thermowells
- Stainless Tubing
- Threaded Fittings
- Temperature Probe Components
- Temperature Sensors
-
Tri Clamp Compatible Fittings
- Tri Clover Compatible X NPT Adapters
- Tri Clover Compatible X Hose Barb
- Tri Clover Compatible X Cam & Groove
- Tri Clover Compatible X Quick Disconnect
- Tri Clover Compatible X Beer Thread
- Tri Clover Compatible X Garden Hose Thread
- Tri Clover Compatible X Corny Post Thread
- Tri Clover Compatible X Compression Adapters
- Tri Clover Compatible X Flare Adapters
- Tri Clover Compatible X BSP Fittings
- Tri Clover Compatible Clamps
- Tri Clover Compatible Gaskets
- Tri Clover Compatible Valves
- Tri Clover Compatible Ferrules
- Tri Clover Compatible Caps
- Tri Clover Compatible Elbows
- Tri Clover Compatible Tees
- Tri Clover Compatible Wyes
- Tri Clover Compatible Crosses
- Tri Clover Compatible Sight Glasses
- Tri Clover Compatible Concentric Reducers
- Tri Clover Compatible Eccentric Reducers
- Tri Clover Compatible Cap-Style Reducers
- Tri Clover Compatible Extension Tubes/Spools
- Tri Clover Compatible Check Valves
- Tri Clover Compatible PRV Tank Breathers
- Tri Clover Compatible Pressure Gauges
-
Shop By Size
- 1/2"-3/4" Tri Clover Compatible Fittings
- 1"/1.5" Tri Clover Compatible Fittings
- 2" Tri Clover Compatible Fittings
- 2.5" Tri Clover Compatible Fittings
- 3" Tri Clover Compatible Fittings
- 4" Tri Clover Compatible Fittings
- 6" Tri Clover Compatible Fittings
- 8" Tri Clover Compatible Fittings
- 10" Tri Clover Compatible Fittings
- 12" Tri Clover Compatible Fittings
- Wort Strainers
- Tubing/Hose
- Weldless Fittings
- Merch
- Clearance
Reinforced Silicone Tubing 1/2" ID X .80" OD - Remnants
TUBES12X.80BRAID-Scrap
Reinforced Silicone Tubing 1/2" ID X .80" OD - Remnants
Over the years, we have collected small remnant lengths of tubing. So it's time to clean house and offer it at a discount! These lengths are perfect for junctions, blow-offs, small transfer sections, etc.
PLEASE NOTE: This is for pre-cut sections of tubing. The tubing may be slightly longer than your selection, but it will never be less. If you order a quantity greater than 1, you will receive multiple sections of pre-cut lengths.
This product is not returnable.
The construction of SILBRADE enables silicone tubing to handle increased pressure applications. SILBRADE offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients. The flexible design and construction of SILBRADE allows excellent bend radii and permits installation in restricted spaces without impeding flow. SILBRADE, a peroxide-cured product, contains no sulphur or other acid-producing chemicals thereby eliminating the possibility of staining, corroding, or deteriorating other materials it contacts. It is also resistant to ozone and U.V. over long time periods. Care is recommended in the selection of fittings and clamps, as sharp barbed fittings or unlined metal clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures. SILBRADE may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.
- -80ºF to 350ºF temperature range
- 1/2" ID X .80" OD
- 141 PSI working pressure 423 PSI burst pressure at 70ºF
- Translucent so you can see wort color and flow
- Remains flexible across a wide variety of temperatures
- Kink resistant
- Made in the USA
This product is not returnable