- Anvil Brewing
- Brewery Controllers
- Brew Stands & Systems
- Brewing Kettles & Hop Filters
- Burners & Accessories
- Blichmann Engineering
- Cam & Groove Fittings
- Conicals & Accessories
- CIP Spray Balls
- Custom Welding
- Fermentor Kits
- Five Star Chemicals
-
Gaskets
- 1/2" & 3/4" Tri Clover Compatible Gaskets
- 1"/1.5" Tri Clover Compatible Gaskets
- 2" Tri Clover Compatible Gaskets
- 2.5" Tri Clover Compatible Gaskets
- 3" Tri Clover Compatible Gaskets
- 4" Tri Clover Compatible Gaskets
- 6" Tri Clover Compatible Gaskets
- 8" Tri Clover Compatible Gaskets
- 10" Tri Clover Compatible Gaskets
- 12" Tri Clover Compatible Gaskets
- Kegging Equipment/Accessories
- Modular Return System
- O-Rings
- Penguin Chillers
- Pumps
- Quick Disconnect Fittings
- RIMS Tubes & Electric Brewing
- Tapcooler Bottle Filler & Accessories
- Thermowells
- Stainless Tubing
- Threaded Fittings
- Temperature Probe Components
- Temperature Sensors
-
Tri Clamp Compatible Fittings
- Tri Clover Compatible X NPT Adapters
- Tri Clover Compatible X Hose Barb
- Tri Clover Compatible X Cam & Groove
- Tri Clover Compatible X Quick Disconnect
- Tri Clover Compatible X Beer Thread
- Tri Clover Compatible X Garden Hose Thread
- Tri Clover Compatible X Corny Post Thread
- Tri Clover Compatible X Compression Adapters
- Tri Clover Compatible X Flare Adapters
- Tri Clover Compatible X BSP Fittings
- Tri Clover Compatible Clamps
- Tri Clover Compatible Gaskets
- Tri Clover Compatible Valves
- Tri Clover Compatible Ferrules
- Tri Clover Compatible Caps
- Tri Clover Compatible Elbows
- Tri Clover Compatible Tees
- Tri Clover Compatible Wyes
- Tri Clover Compatible Crosses
- Tri Clover Compatible Sight Glasses
- Tri Clover Compatible Concentric Reducers
- Tri Clover Compatible Eccentric Reducers
- Tri Clover Compatible Cap-Style Reducers
- Tri Clover Compatible Extension Tubes/Spools
- Tri Clover Compatible Check Valves
- Tri Clover Compatible PRV Tank Breathers
- Tri Clover Compatible Pressure Gauges
-
Shop By Size
- 1/2"-3/4" Tri Clover Compatible Fittings
- 1"/1.5" Tri Clover Compatible Fittings
- 2" Tri Clover Compatible Fittings
- 2.5" Tri Clover Compatible Fittings
- 3" Tri Clover Compatible Fittings
- 4" Tri Clover Compatible Fittings
- 6" Tri Clover Compatible Fittings
- 8" Tri Clover Compatible Fittings
- 10" Tri Clover Compatible Fittings
- 12" Tri Clover Compatible Fittings
- Wort Strainers
- Tubing/Hose
- Weldless Fittings
- Merch
- Clearance
6" Weldless Thermowell
WLFTW6
6" Weldless Thermowell
Using the same face-sealing o-ring design as our popular weldless bulkheads, this thermowell was designed from the ground up to be a weldless thermowell. 6" penetration into the vessel, with a .27" ID to fit most digital controller/thermometer sensors. Saves the expense of adding a weldless bulkhead first, then adding a thermowell to that. Includes 2 silicone o-rings and locknut. 304 stainless.
requires 1/2" hole and has 1/2" X 20UNF threads. Also requires a wrench or channel locks that can grab a 1-1/8" hex.
Customer reviews
-
Benjamin HockingDec 31, 1969, 16:00If you have ever purchased anything from Brewers Hardware this is the same high quality part that you have purchased before. I don't think anyone makes then better. Even the nut faces have been machined to allow the o ring a place to sit. One thing that the description lacks is that there are no threads on the inside of the kettle or fermenter that you are installing it into, since there is an O ring on the inside face of the thermowell. Making this the only sanitary weldless thermowell I have seen available to buy, Perfect for a fermenter. It will last a life time and looks tough enough to take a strike from a mash paddle. Hand tight is all that I need to have a leakless seal.
-
Rahul CherianDec 31, 1969, 16:00I was amazed at how beautiful this thermowell is! It feels solid and heavy, threads perfectly and is well thought out (machined so the o-rings sit in place). Fits perfectly into my Blichmann pot. Highly recommended.